Quick Cart Guide
 

Flip the power switch to the ON position to turn on the data projector.
 
 

 

 

 

 

 


 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 


                                                                                                           

 

                                                                                                                       

 

 

 

 

 

 

 

 

 

 

 

 

 

Once the computer is on (above) you must press input until RGB 1 appears in the left hand corner of the display.
 
 

 

 

 


                                                                                               

           

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 


Text Box: To hear sound from the computer, the 1 button on the audio selector switch is pressed in.

 

 

 

 

 


                                                                                                                       

 


VCR uses #2 button
 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

IMPORTANT!!!

Turning power off on data projector:

Press the standby/on button and “Power off?” will appear.  Press button again and wait until orange power indicator turns solid.  Turn main power switch off.  If main power is turned off while fan is cooling, it could cause damage to the lamp.
 
 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 


Dukane Data Projector

Remote Control

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Using the Lumens Document Camera
 
 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Using the Remote with Document Camera
 
 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

To Capture Image with Document Camera
 
 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

To Download Images from Document Camera to Computer
 
 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 


 

 

 

 

 

Troubleshooting Tips:

 

Data Projector

 

·         Problem:  Projector display cuts in and out. Suggestion:  Power cable from projector may be loose.  Make sure cable is plugged in securely.

·         Problem:  Image is frozen on screen.  Suggestion:  Press the freeze button on data projector remote.

 

Audio

 

·         Problem:  No audio.  When on/volume switch on speakers is turned on, there is no green light.  Suggestion:  Power supply for speakers has become unplugged.  In lower cabinet, look for a square AC adaptor and plug back into a power strip.

 

PC

 

·         Problem:  Projector is in RGB 1 mode but there is no video from the computer.  Suggestion:   Move the mouse around to “wake up” PC video.  The computer may have gone into hibernate mode.

·         Problem:  When playing a DVD or showing a video, the PC projects on screen but there is no audio.  Suggestion:   Make sure audio selector switch is in PC #1 mode.  Check if speaker on/volume switch is on and the volume control is turned up.

·         Problem:  No audio when playing a downloaded video or a DVD.  Suggestion:  Check cable connection between PC audio out (green mini jack on the back of computer) to RCA Red and White input #1 on audio selector switch.

·         Problem:  No audio when playing a downloaded video or a DVD.  Suggestion:  Right click on speaker icon on right hand corner of taskbar.

Select open volume control and make sure Mute is not checked.  Adjust volume control and Wave control.       

 

Document Camera

 

·         Problem:  Projector is in RGB 2 mode but there is no video from document camera.  Message from data projector displays “RGB 2 input not detected”.   Suggestion:  Push the source button on the document camera.

·         Problem:  Projector is in RGB 2 mode but there is no video from document camera.  Source button did not solve it.  Suggestion:  Check connectivity of VGA cable on document camera. Cable should be connected to VGA Out.

·         Problem:  Document camera image is in Black & White or looks like a negative.  Suggestion:  Using the effects button on document camera, select color mode.

·         Problem:  The document or object still shows on screen after I have removed it.  Suggestion:  Try to unfreeze image by pushing the Freeze button on document camera.  If image is still frozen, press the freeze button on data projector remote.

·         Problem:  Camera picture constantly changes from white to gray to black and back.  Suggestion:  Try adjusting flicker, white balance and contrast. Press menu key.  Using down arrow, highlight exposure.  Use right arrow to go to submenu.  Use down arrow to highlight flicker and down arrow to select 60 HZ.  Use right arrow to set.  Use menu button to get back to main menu.  Place a blank piece of white paper under document camera.  Use up arrow to highlight white balance.  Use right arrow to select and up arrow to highlight Auto.  Use right arrow to set.  Use menu key to get to main menu.   Highlight contrast.  Use right arrow to select and right arrow again to increase contrast.  Hit menu key twice to get out of menu.

 

 

VCR

 

·         Problem:  No video from VCR.  Suggestion:  Check if data projector is in video input mode.

·         Problem:  No VCR audio.      Suggestion:  Make sure audio selector switch is in VCR #2 mode.

·         Problem:  No VCR audio.  Audio selector switch is in #2 mode.  Suggestion:  Check RCA cable connection between VCR audio line out (Red and White jacks) and the #2 input of audio selector switch.

 

 

Windows Media Player does not show video

 

Right click on desktop and select properties.

The Display properties window opens.

 


Click on settings tab.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 


Click the Advanced button.

 

 

 

 


Select troubleshoot tab.

 

 

 

 

 

 

 

 


Slide the acceleration bar to full.

 

 

 

 

 

 

 

Click ok.

 

 

 



Teacher Presentation Cart Checklist

 

 

To view PowerPoint:

□     Login to PC

□     Turn on data projector and select correct input

□     Open an existing PowerPoint File and View Show

 

 

To view DVD:

 

□     Insert DVD into drawer

□     Select correct input on data projector

□     Select a chapter or play movie in Media Player

□     Select correct input on audio selector switch and adjust volume

□     Put Media Player in Full Screen mode

□     Pause movie

 

 

To view Document Camera:

 

□     Turn on document camera.

□     Select correct input on data projector

□     Adjust arm, lens, focus and zoom in/out.

 

 

To view VCR:

 

□     Turn on VCR

□     Select correct input on data projector

□     Put tape in VCR.  Prerecorded tapes will automatically go in play mode

□     Select correct input on audio selector switch and adjust volume

□     Pause VCR tape

 

 

To Power off Data Projector:

 

□     Put data projector in standby.

□     Allow to COOL!!

□     What has to happen before main power switch can be turned off??